XHHW 600V Aluminum Alloy Cable Three Conductor PVC Jacket with 1 Bare AL Ground

Aluminum Alloy Cable 600V Three Conductor XHHW PVC Jacket with 1 Bare AL Ground

CONSTRUCTION:

1. Conductor: Class B compact stranded 8000 Series aluminum per ASTM B800 and ASTM B836

2. Insulation: Cross Linked Polyethylene (XLPE) Type XHHW-2

3. Grounding Conductor: Class B compact stranded 8000 Series aluminum per ASTM B800 and ASTM B836

4. Filler: Paper filler (cable size 8 & 6 uses Polypropylene filler)

5. Binder: Polyester flat thread binder tape for cable sizes larger than 2 AWG

6. Overall Jacket: Polyvinyl Chloride (PVC) Jacket

APPLICATIONS AND FEATURES:

600 Volt Type TC-ER power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired.

These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions.

For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502. Constructions with 3 or more conductors are listed for exposed runs (TC-ER) per NEC 336.10.

SPECIFICATIONS:

• ASTM B800 8000 Series Aluminum Alloy Wire

• ASTM B836 Compact Rounded Stranded Aluminum Conductors

• UL 44 Thermoset Insulated wires And cables

• UL 1277 Electrical Power And Control Cable

• UL 1685 - Flame Test

• UL 1581 - Electrical Wires, Cables and Flexible Cords

• IEEE 1202/FT4 - Vertical Tray Flame Test (70,000 Btu/hr) And ICEA T-29-520 - (210,000 Btu/hr)

• ICEA S-58-679 - Control Cable Conductor Identification Method 4

• ICEA S-95-658 NEMA WC70 - Power cables rated 2000 volts or less for the distribution of electrical energy

DIMENSIONS